Selective laser sintering (SLS) 3D printing process: Influence of model design on the properties of zolpidem tartrate tablets
Аутори
Adamov, IvanaStanojević, Gordana
Kočović, David
Mugoša, Snežana
Grujić, Branka
Ibrić, Svetlana
Конференцијски прилог (Објављена верзија)
Метаподаци
Приказ свих података о документуАпстракт
Three-dimensional printing (3DP) is an innovative
additive manufacturing technology in the field of
pharmaceuticals that has the potential to provide small
batches of patient-tailored medicines (Wang et al., 2021).
One of the newest and most advanced 3DP techniques is
selective laser sintering (SLS), a one-step manufacturing
process that uses a laser to selectively sinter powder
particles into layers and create a 3D structure of a solid
dosage form. Depending on the 3D design of the object, the
laser is focused to draw specific patterns on the surface of
the powder. Once the first layer is sintered, a fresh layer of
powder is sprinkled on top so that a new layer can be
sintered (Allahham et al., 2020). The aim of this study was
to formulate and investigate the influence of the model
design on the properties of zolpidem tartrate (ZT) tablets
produced by the SLS 3DP process.
Извор:
Macedonian Pharmaceutical Bulletin, 2023, 69, Suppl 1, 133-134Издавач:
- Macedonian Pharmaceutical Association
- Ss. Cyril and Methodius University in Skopje, Faculty of Pharmacy
Напомена:
- 14th Central European Symposium on Pharmaceutical Technology, 28th - 30th September, Ohrid, N. Macedonia, 2023
Институција/група
PharmacyTY - CONF AU - Adamov, Ivana AU - Stanojević, Gordana AU - Kočović, David AU - Mugoša, Snežana AU - Grujić, Branka AU - Ibrić, Svetlana PY - 2023 UR - https://farfar.pharmacy.bg.ac.rs/handle/123456789/5066 AB - Three-dimensional printing (3DP) is an innovative additive manufacturing technology in the field of pharmaceuticals that has the potential to provide small batches of patient-tailored medicines (Wang et al., 2021). One of the newest and most advanced 3DP techniques is selective laser sintering (SLS), a one-step manufacturing process that uses a laser to selectively sinter powder particles into layers and create a 3D structure of a solid dosage form. Depending on the 3D design of the object, the laser is focused to draw specific patterns on the surface of the powder. Once the first layer is sintered, a fresh layer of powder is sprinkled on top so that a new layer can be sintered (Allahham et al., 2020). The aim of this study was to formulate and investigate the influence of the model design on the properties of zolpidem tartrate (ZT) tablets produced by the SLS 3DP process. PB - Macedonian Pharmaceutical Association PB - Ss. Cyril and Methodius University in Skopje, Faculty of Pharmacy C3 - Macedonian Pharmaceutical Bulletin T1 - Selective laser sintering (SLS) 3D printing process: Influence of model design on the properties of zolpidem tartrate tablets VL - 69 IS - Suppl 1 SP - 133 EP - 134 DO - 10.33320/maced.pharm.bull.2023.69.03.065 ER -
@conference{ author = "Adamov, Ivana and Stanojević, Gordana and Kočović, David and Mugoša, Snežana and Grujić, Branka and Ibrić, Svetlana", year = "2023", abstract = "Three-dimensional printing (3DP) is an innovative additive manufacturing technology in the field of pharmaceuticals that has the potential to provide small batches of patient-tailored medicines (Wang et al., 2021). One of the newest and most advanced 3DP techniques is selective laser sintering (SLS), a one-step manufacturing process that uses a laser to selectively sinter powder particles into layers and create a 3D structure of a solid dosage form. Depending on the 3D design of the object, the laser is focused to draw specific patterns on the surface of the powder. Once the first layer is sintered, a fresh layer of powder is sprinkled on top so that a new layer can be sintered (Allahham et al., 2020). The aim of this study was to formulate and investigate the influence of the model design on the properties of zolpidem tartrate (ZT) tablets produced by the SLS 3DP process.", publisher = "Macedonian Pharmaceutical Association, Ss. Cyril and Methodius University in Skopje, Faculty of Pharmacy", journal = "Macedonian Pharmaceutical Bulletin", title = "Selective laser sintering (SLS) 3D printing process: Influence of model design on the properties of zolpidem tartrate tablets", volume = "69", number = "Suppl 1", pages = "133-134", doi = "10.33320/maced.pharm.bull.2023.69.03.065" }
Adamov, I., Stanojević, G., Kočović, D., Mugoša, S., Grujić, B.,& Ibrić, S.. (2023). Selective laser sintering (SLS) 3D printing process: Influence of model design on the properties of zolpidem tartrate tablets. in Macedonian Pharmaceutical Bulletin Macedonian Pharmaceutical Association., 69(Suppl 1), 133-134. https://doi.org/10.33320/maced.pharm.bull.2023.69.03.065
Adamov I, Stanojević G, Kočović D, Mugoša S, Grujić B, Ibrić S. Selective laser sintering (SLS) 3D printing process: Influence of model design on the properties of zolpidem tartrate tablets. in Macedonian Pharmaceutical Bulletin. 2023;69(Suppl 1):133-134. doi:10.33320/maced.pharm.bull.2023.69.03.065 .
Adamov, Ivana, Stanojević, Gordana, Kočović, David, Mugoša, Snežana, Grujić, Branka, Ibrić, Svetlana, "Selective laser sintering (SLS) 3D printing process: Influence of model design on the properties of zolpidem tartrate tablets" in Macedonian Pharmaceutical Bulletin, 69, no. Suppl 1 (2023):133-134, https://doi.org/10.33320/maced.pharm.bull.2023.69.03.065 . .