Đorđević-Filijović, Nataša

Link to this page

Authority KeyName Variants
54619336-7fc0-4d76-af3b-f268e82dc150
  • Đorđević-Filijović, Nataša (3)
Projects

Author's Bibliography

The stress stability of olanzapine: studies of interactions with excipients in solid state pharmaceutical formulations

Đorđević-Filijović, Nataša; Antonijević, Milan D.; Pavlović, Aleksandar; Vucković, Ivan M.; Nikolić, Katarina; Agbaba, Danica

(Informa Healthcare, London, 2015)

TY  - JOUR
AU  - Đorđević-Filijović, Nataša
AU  - Antonijević, Milan D.
AU  - Pavlović, Aleksandar
AU  - Vucković, Ivan M.
AU  - Nikolić, Katarina
AU  - Agbaba, Danica
PY  - 2015
UR  - https://farfar.pharmacy.bg.ac.rs/handle/123456789/2415
AB  - Stress stability testing represents an important part of the drug development process. It is used as an important tool for the identification of degradation products and degradation pathways, as well as for the assessment of changes in physical form of drug molecules. The impact of excipients on the stability of olanzapine confirms that levels of impurities and degradants are limiting parameters and are therefore used for stability evaluation. The major degradation product of olanzapine was identified as 2-methyl-5,10-dihydro-4H-thieno[2,3-b][1,5] benzodiazepine-4-one (III). The structure of III was determined by using LC-MS, IR and NMR. Compatibility and stress stability results demonstrated that tablet formulations of olanzapine are sensitive to temperature and moisture. In samples protected from moisture, the increase in concentration of III was shown to be highly temperature dependent and the degradation followed zero-order kinetics. In addition, studies of olanzapine with excipients and in formulated tablets revealed polymorphic phase changes in some samples, influenced by a combination of stress temperature and humidity conditions. Polymorphic transitions were monitored using x-ray powder diffraction (XRPD) analysis and exhibited no correlation between the phase change (appearance of a new polymorph) and the degradation process.
PB  - Informa Healthcare, London
T2  - Drug Development and Industrial Pharmacy
T1  - The stress stability of olanzapine: studies of interactions with excipients in solid state pharmaceutical formulations
VL  - 41
IS  - 3
SP  - 502
EP  - 514
DO  - 10.3109/03639045.2014.884114
ER  - 
@article{
author = "Đorđević-Filijović, Nataša and Antonijević, Milan D. and Pavlović, Aleksandar and Vucković, Ivan M. and Nikolić, Katarina and Agbaba, Danica",
year = "2015",
abstract = "Stress stability testing represents an important part of the drug development process. It is used as an important tool for the identification of degradation products and degradation pathways, as well as for the assessment of changes in physical form of drug molecules. The impact of excipients on the stability of olanzapine confirms that levels of impurities and degradants are limiting parameters and are therefore used for stability evaluation. The major degradation product of olanzapine was identified as 2-methyl-5,10-dihydro-4H-thieno[2,3-b][1,5] benzodiazepine-4-one (III). The structure of III was determined by using LC-MS, IR and NMR. Compatibility and stress stability results demonstrated that tablet formulations of olanzapine are sensitive to temperature and moisture. In samples protected from moisture, the increase in concentration of III was shown to be highly temperature dependent and the degradation followed zero-order kinetics. In addition, studies of olanzapine with excipients and in formulated tablets revealed polymorphic phase changes in some samples, influenced by a combination of stress temperature and humidity conditions. Polymorphic transitions were monitored using x-ray powder diffraction (XRPD) analysis and exhibited no correlation between the phase change (appearance of a new polymorph) and the degradation process.",
publisher = "Informa Healthcare, London",
journal = "Drug Development and Industrial Pharmacy",
title = "The stress stability of olanzapine: studies of interactions with excipients in solid state pharmaceutical formulations",
volume = "41",
number = "3",
pages = "502-514",
doi = "10.3109/03639045.2014.884114"
}
Đorđević-Filijović, N., Antonijević, M. D., Pavlović, A., Vucković, I. M., Nikolić, K.,& Agbaba, D.. (2015). The stress stability of olanzapine: studies of interactions with excipients in solid state pharmaceutical formulations. in Drug Development and Industrial Pharmacy
Informa Healthcare, London., 41(3), 502-514.
https://doi.org/10.3109/03639045.2014.884114
Đorđević-Filijović N, Antonijević MD, Pavlović A, Vucković IM, Nikolić K, Agbaba D. The stress stability of olanzapine: studies of interactions with excipients in solid state pharmaceutical formulations. in Drug Development and Industrial Pharmacy. 2015;41(3):502-514.
doi:10.3109/03639045.2014.884114 .
Đorđević-Filijović, Nataša, Antonijević, Milan D., Pavlović, Aleksandar, Vucković, Ivan M., Nikolić, Katarina, Agbaba, Danica, "The stress stability of olanzapine: studies of interactions with excipients in solid state pharmaceutical formulations" in Drug Development and Industrial Pharmacy, 41, no. 3 (2015):502-514,
https://doi.org/10.3109/03639045.2014.884114 . .
8
5
7

Validation of an HPLC method for determination of aripiprazole and its impurities in pharmaceuticals

Đorđević-Filijović, Nataša; Pavlović, Aleksandar; Nikolić, Katarina; Agbaba, Danica

(Akademiai Kiado Rt, Budapest, 2014)

TY  - JOUR
AU  - Đorđević-Filijović, Nataša
AU  - Pavlović, Aleksandar
AU  - Nikolić, Katarina
AU  - Agbaba, Danica
PY  - 2014
UR  - https://farfar.pharmacy.bg.ac.rs/handle/123456789/2152
AB  - Aripiprazole is a novel atypical antipsychotic drug used in the treatment of schizophrenia. The sensitive and reproducible ion pair RPLC method was developed and validated for determination of aripiprazole and its nine impurities, which are significantly different in polarity. The separation was performed on Phenomenex Luna (R) C18 column (5.0 mu m particle size, 250 x 4.6 mm id) using a gradient mobile phase A (phosphate buffer pH 3.0) and mobile phase B (acetonitrile) at the working temperature of 25 degrees C. The buffer was 1.11 g KH2PO4 with 1.2 g sodium pentanesulfonate/L of the solution, adjusted to pH 3.0 with orthophosphoric acid. The flow rate was 1.0 mL/min. The detection was carried out at 215 nm using a diode array detector. The developed method was validated according to the International Conference on Harmonization (ICH) guidelines for specificity, limit of detection, limit of quantification, linearity, precision and robustness. The proposed method is convenient and reliable for the purity control in both raw materials and dosage forms.
PB  - Akademiai Kiado Rt, Budapest
T2  - Acta Chromatographica
T1  - Validation of an HPLC method for determination of aripiprazole and its impurities in pharmaceuticals
VL  - 26
IS  - 1
SP  - 13
EP  - 28
DO  - 10.1556/AChrom.26.2014.1.15
ER  - 
@article{
author = "Đorđević-Filijović, Nataša and Pavlović, Aleksandar and Nikolić, Katarina and Agbaba, Danica",
year = "2014",
abstract = "Aripiprazole is a novel atypical antipsychotic drug used in the treatment of schizophrenia. The sensitive and reproducible ion pair RPLC method was developed and validated for determination of aripiprazole and its nine impurities, which are significantly different in polarity. The separation was performed on Phenomenex Luna (R) C18 column (5.0 mu m particle size, 250 x 4.6 mm id) using a gradient mobile phase A (phosphate buffer pH 3.0) and mobile phase B (acetonitrile) at the working temperature of 25 degrees C. The buffer was 1.11 g KH2PO4 with 1.2 g sodium pentanesulfonate/L of the solution, adjusted to pH 3.0 with orthophosphoric acid. The flow rate was 1.0 mL/min. The detection was carried out at 215 nm using a diode array detector. The developed method was validated according to the International Conference on Harmonization (ICH) guidelines for specificity, limit of detection, limit of quantification, linearity, precision and robustness. The proposed method is convenient and reliable for the purity control in both raw materials and dosage forms.",
publisher = "Akademiai Kiado Rt, Budapest",
journal = "Acta Chromatographica",
title = "Validation of an HPLC method for determination of aripiprazole and its impurities in pharmaceuticals",
volume = "26",
number = "1",
pages = "13-28",
doi = "10.1556/AChrom.26.2014.1.15"
}
Đorđević-Filijović, N., Pavlović, A., Nikolić, K.,& Agbaba, D.. (2014). Validation of an HPLC method for determination of aripiprazole and its impurities in pharmaceuticals. in Acta Chromatographica
Akademiai Kiado Rt, Budapest., 26(1), 13-28.
https://doi.org/10.1556/AChrom.26.2014.1.15
Đorđević-Filijović N, Pavlović A, Nikolić K, Agbaba D. Validation of an HPLC method for determination of aripiprazole and its impurities in pharmaceuticals. in Acta Chromatographica. 2014;26(1):13-28.
doi:10.1556/AChrom.26.2014.1.15 .
Đorđević-Filijović, Nataša, Pavlović, Aleksandar, Nikolić, Katarina, Agbaba, Danica, "Validation of an HPLC method for determination of aripiprazole and its impurities in pharmaceuticals" in Acta Chromatographica, 26, no. 1 (2014):13-28,
https://doi.org/10.1556/AChrom.26.2014.1.15 . .
24
16
22

Development of a novel RP-HPLC method for the efficient separation of aripiprazole and its nine impurities

Nikolić, Katarina; Đorđević-Filijović, Nataša; Maricić, Borislava; Agbaba, Danica

(Wiley-VCH Verlag GMBH, Weinheim, 2013)

TY  - JOUR
AU  - Nikolić, Katarina
AU  - Đorđević-Filijović, Nataša
AU  - Maricić, Borislava
AU  - Agbaba, Danica
PY  - 2013
UR  - https://farfar.pharmacy.bg.ac.rs/handle/123456789/1870
AB  - The development of an RP-HPLC method for the separation of aripiprazole and its nine impurities was performed with the use of partial least squares regression, response surface plot methodology, and chromatographic response function. The HPLC retention times and computed molecular parameters of the aripiprazole and its nine impurities were further used for the quantitative structure-retention relationship (QSRR) study. The QSRR model, R-2: 0.899, Q(2): 0.832, root mean square error of estimation: 4.761, root mean square error of prediction: 6.614, was developed. Very good agreement between the predicted and observed retention times (t(R)) for three additional aripiprazole impurities (TC1-TC3) indicated the high prediction potential of the QSRR model for t(R) evaluation of other aripiprazole impurities and metabolites. The developed HPLC method is the first reported method for the efficient separation of aripiprazole and its nine impurities, which could be used for the analysis of an additional three aripiprazole impurities (TC1-TC3).
PB  - Wiley-VCH Verlag GMBH, Weinheim
T2  - Journal of Separation Science
T1  - Development of a novel RP-HPLC method for the efficient separation of aripiprazole and its nine impurities
VL  - 36
IS  - 19
SP  - 3165
EP  - 3175
DO  - 10.1002/jssc.201300477
ER  - 
@article{
author = "Nikolić, Katarina and Đorđević-Filijović, Nataša and Maricić, Borislava and Agbaba, Danica",
year = "2013",
abstract = "The development of an RP-HPLC method for the separation of aripiprazole and its nine impurities was performed with the use of partial least squares regression, response surface plot methodology, and chromatographic response function. The HPLC retention times and computed molecular parameters of the aripiprazole and its nine impurities were further used for the quantitative structure-retention relationship (QSRR) study. The QSRR model, R-2: 0.899, Q(2): 0.832, root mean square error of estimation: 4.761, root mean square error of prediction: 6.614, was developed. Very good agreement between the predicted and observed retention times (t(R)) for three additional aripiprazole impurities (TC1-TC3) indicated the high prediction potential of the QSRR model for t(R) evaluation of other aripiprazole impurities and metabolites. The developed HPLC method is the first reported method for the efficient separation of aripiprazole and its nine impurities, which could be used for the analysis of an additional three aripiprazole impurities (TC1-TC3).",
publisher = "Wiley-VCH Verlag GMBH, Weinheim",
journal = "Journal of Separation Science",
title = "Development of a novel RP-HPLC method for the efficient separation of aripiprazole and its nine impurities",
volume = "36",
number = "19",
pages = "3165-3175",
doi = "10.1002/jssc.201300477"
}
Nikolić, K., Đorđević-Filijović, N., Maricić, B.,& Agbaba, D.. (2013). Development of a novel RP-HPLC method for the efficient separation of aripiprazole and its nine impurities. in Journal of Separation Science
Wiley-VCH Verlag GMBH, Weinheim., 36(19), 3165-3175.
https://doi.org/10.1002/jssc.201300477
Nikolić K, Đorđević-Filijović N, Maricić B, Agbaba D. Development of a novel RP-HPLC method for the efficient separation of aripiprazole and its nine impurities. in Journal of Separation Science. 2013;36(19):3165-3175.
doi:10.1002/jssc.201300477 .
Nikolić, Katarina, Đorđević-Filijović, Nataša, Maricić, Borislava, Agbaba, Danica, "Development of a novel RP-HPLC method for the efficient separation of aripiprazole and its nine impurities" in Journal of Separation Science, 36, no. 19 (2013):3165-3175,
https://doi.org/10.1002/jssc.201300477 . .
15
13
14