TY  - JOUR
AU  - Popadić, Daliborka
AU  - Krstić, Jugoslav
AU  - Janošević-Ležaić, Aleksandra
AU  - Popović, Maja
AU  - Milojević-Rakić, Maja
AU  - Ignjatović, Ljubiša
AU  - Bajuk-Bogdanović, Danica
AU  - Gavrilov, Nemanja
PY  - 2024
UR  - https://farfar.pharmacy.bg.ac.rs/handle/123456789/5405
AB  - Reuse and/or recycling of spent adsorbents is taking a central role in modern thinking and catalyzed carbonization is the way forward. Herein we explore the carbonization of adsorbed acetamiprid, in an inert atmosphere, as a way of recycling and producing nitrogen-rich carbon material for potential use in supercapacitors. Added value material and the reuse of the adsorbent were achieved by carbonization at 700 °C under argon. The formation of a nitrogen-doped carbon layer as an active material on the adsorbent, bonded through a C-Si linkage, has been conclusively verified through elemental composition quantification using XPS and EDX measurements. Two-stage catalytic decomposition and condensation of the adsorbed pesticide is followed by TGA and TPD-MS. Attained carbon-based materials give stable Faradaic capacitance with a slight dependency on the number of adsorbing cycles. Capacitance calculated with respect to the adlayer carbon material reaches values as high as 610 F g−1. Galvanostatic Charge/Discharge measurement confirmed the stability of explored materials with a slight increase in capacitance over 1000 cycles. The presented results envisage electroactive materials preparation from environmental pollutants, adding value to spent adsorbents.
PB  - Elsevier B.V.
T2  - Spectrochimica Acta - Part A: Molecular and Biomolecular Spectroscopy
T1  - Acetamiprid's degradation products and mechanism: Part II – Inert atmosphere and charge storage
VL  - 308
DO  - 10.1016/j.saa.2023.123772
ER  - 

@article{
author = "Popadić, Daliborka and Krstić, Jugoslav and Janošević-Ležaić, Aleksandra and Popović, Maja and Milojević-Rakić, Maja and Ignjatović, Ljubiša and Bajuk-Bogdanović, Danica and Gavrilov, Nemanja",
year = "2024",
abstract = "Reuse and/or recycling of spent adsorbents is taking a central role in modern thinking and catalyzed carbonization is the way forward. Herein we explore the carbonization of adsorbed acetamiprid, in an inert atmosphere, as a way of recycling and producing nitrogen-rich carbon material for potential use in supercapacitors. Added value material and the reuse of the adsorbent were achieved by carbonization at 700 °C under argon. The formation of a nitrogen-doped carbon layer as an active material on the adsorbent, bonded through a C-Si linkage, has been conclusively verified through elemental composition quantification using XPS and EDX measurements. Two-stage catalytic decomposition and condensation of the adsorbed pesticide is followed by TGA and TPD-MS. Attained carbon-based materials give stable Faradaic capacitance with a slight dependency on the number of adsorbing cycles. Capacitance calculated with respect to the adlayer carbon material reaches values as high as 610 F g−1. Galvanostatic Charge/Discharge measurement confirmed the stability of explored materials with a slight increase in capacitance over 1000 cycles. The presented results envisage electroactive materials preparation from environmental pollutants, adding value to spent adsorbents.",
publisher = "Elsevier B.V.",
journal = "Spectrochimica Acta - Part A: Molecular and Biomolecular Spectroscopy",
title = "Acetamiprid's degradation products and mechanism: Part II – Inert atmosphere and charge storage",
volume = "308",
doi = "10.1016/j.saa.2023.123772"
}

Popadić, D., Krstić, J., Janošević-Ležaić, A., Popović, M., Milojević-Rakić, M., Ignjatović, L., Bajuk-Bogdanović, D.,& Gavrilov, N.. (2024). Acetamiprid's degradation products and mechanism: Part II – Inert atmosphere and charge storage. in Spectrochimica Acta - Part A: Molecular and Biomolecular Spectroscopy
Elsevier B.V.., 308.
https://doi.org/10.1016/j.saa.2023.123772

Popadić D, Krstić J, Janošević-Ležaić A, Popović M, Milojević-Rakić M, Ignjatović L, Bajuk-Bogdanović D, Gavrilov N. Acetamiprid's degradation products and mechanism: Part II – Inert atmosphere and charge storage. in Spectrochimica Acta - Part A: Molecular and Biomolecular Spectroscopy. 2024;308.
doi:10.1016/j.saa.2023.123772 .

Popadić, Daliborka, Krstić, Jugoslav, Janošević-Ležaić, Aleksandra, Popović, Maja, Milojević-Rakić, Maja, Ignjatović, Ljubiša, Bajuk-Bogdanović, Danica, Gavrilov, Nemanja, "Acetamiprid's degradation products and mechanism: Part II – Inert atmosphere and charge storage" in Spectrochimica Acta - Part A: Molecular and Biomolecular Spectroscopy, 308 (2024),
https://doi.org/10.1016/j.saa.2023.123772 . .

TY  - JOUR
AU  - Popadić, Daliborka
AU  - Gavrilov, Nemanja
AU  - Ignjatović, Ljubiša
AU  - Krajišnik, Danina
AU  - Mentus, Slavko
AU  - Milojević-Rakić, Maja
AU  - Bajuk-Bogdanović, Danica
PY  - 2022
UR  - https://www.mdpi.com/2073-4344/12/5/519
UR  - https://farfar.pharmacy.bg.ac.rs/handle/123456789/4099
AB  - Unmodified natural silicates (bentonite, kaolin, clinoptilolite and diatomites) were tested as adsorbents for the organic pollutants in water tables using Methylene Blue (MB) as the model adsorbate. Among the selected materials, bentonite adsorbed as much as 237 mg/g, confirming its excellent suitability for pollutant removal. Spectral evidence confirmed successful MB immobilization at the bentonite surface. Furthermore, the thermal treatment of MB-saturated adsorbent in an inert atmosphere at 700 °C produced a carbon/silicate composite. EDX confirmed the formation of the nitrogen-doped carbon overlay on the silica scaffold and the obtained composite material was probed as an electrode material for oxygen reduction in an alkaline solution. Reduction proceeded via a two-electron mechanism with the main product being HO2−, a known nucleophile, which was subsequently used to degrade/demethylate MB. The composite showed a considerable 70% MB removal rate after an hour of electrochemical treatment. The synergy between the processes of adsorption of MB and the surface-generated HO2− dictates the efficiency of the method and points to a possible route for spent adsorbent reuse in the form of a durable product for environmental protection.
PB  - MDPI
T2  - Catalysts
T1  - How to Obtain Maximum Environmental Applicability from Natural Silicates
VL  - 12
IS  - 5
DO  - 10.3390/catal12050519
ER  - 

@article{
author = "Popadić, Daliborka and Gavrilov, Nemanja and Ignjatović, Ljubiša and Krajišnik, Danina and Mentus, Slavko and Milojević-Rakić, Maja and Bajuk-Bogdanović, Danica",
year = "2022",
abstract = "Unmodified natural silicates (bentonite, kaolin, clinoptilolite and diatomites) were tested as adsorbents for the organic pollutants in water tables using Methylene Blue (MB) as the model adsorbate. Among the selected materials, bentonite adsorbed as much as 237 mg/g, confirming its excellent suitability for pollutant removal. Spectral evidence confirmed successful MB immobilization at the bentonite surface. Furthermore, the thermal treatment of MB-saturated adsorbent in an inert atmosphere at 700 °C produced a carbon/silicate composite. EDX confirmed the formation of the nitrogen-doped carbon overlay on the silica scaffold and the obtained composite material was probed as an electrode material for oxygen reduction in an alkaline solution. Reduction proceeded via a two-electron mechanism with the main product being HO2−, a known nucleophile, which was subsequently used to degrade/demethylate MB. The composite showed a considerable 70% MB removal rate after an hour of electrochemical treatment. The synergy between the processes of adsorption of MB and the surface-generated HO2− dictates the efficiency of the method and points to a possible route for spent adsorbent reuse in the form of a durable product for environmental protection.",
publisher = "MDPI",
journal = "Catalysts",
title = "How to Obtain Maximum Environmental Applicability from Natural Silicates",
volume = "12",
number = "5",
doi = "10.3390/catal12050519"
}

Popadić, D., Gavrilov, N., Ignjatović, L., Krajišnik, D., Mentus, S., Milojević-Rakić, M.,& Bajuk-Bogdanović, D.. (2022). How to Obtain Maximum Environmental Applicability from Natural Silicates. in Catalysts
MDPI., 12(5).
https://doi.org/10.3390/catal12050519

Popadić D, Gavrilov N, Ignjatović L, Krajišnik D, Mentus S, Milojević-Rakić M, Bajuk-Bogdanović D. How to Obtain Maximum Environmental Applicability from Natural Silicates. in Catalysts. 2022;12(5).
doi:10.3390/catal12050519 .

Popadić, Daliborka, Gavrilov, Nemanja, Ignjatović, Ljubiša, Krajišnik, Danina, Mentus, Slavko, Milojević-Rakić, Maja, Bajuk-Bogdanović, Danica, "How to Obtain Maximum Environmental Applicability from Natural Silicates" in Catalysts, 12, no. 5 (2022),
https://doi.org/10.3390/catal12050519 . .

TY  - JOUR
AU  - Jevremović, Anka
AU  - Nedić-Vasiljević, Bojana
AU  - Popa, Alexandru
AU  - Uskoković-Marković, Snežana
AU  - Ignjatović, Ljubiša
AU  - Bajuk-Bogdanović, Danica
AU  - Milojević-Rakić, Maja
PY  - 2021
UR  - https://farfar.pharmacy.bg.ac.rs/handle/123456789/3783
AB  - Environmental implementation of novel composite materials comprising potassium tungstophosphate (KPW) and ZSM-5 zeolite was tested in ethene production and pesticide removal. The study revealed that the binding of KPW to ZSM-5 zeolites of different Si/Al ratios affects the formation of active centres for catalytic and adsorption processes. Brønsted active sites present in the zeolite framework are synergistically joined with Lewis centres and additional Brønsted centres through the impregnation of potassium tungstophosphate, which resulted in improvement of stability and activity of investigated materials. Adsorption and catalytic performance were found to be influenced by the order of addition of salt precursors and by post-synthesis thermal treatment. The best results found both in ethanol dehydration and nicosulfuron removal were for the same sample of KPW supported at zeolite ZSM-5 (SiO2/Al2O3 = 30). The prominent ethanol conversion of 98% and the highest and most stable selectivity toward ethene were evidenced, along with the capacity of 28.4 mg of targeted pesticide retained per gram of designed KPW/ZSM composite. This comprehensive investigation enabled insight into active site formations in the efficient KPW/ZSM composites. Different approaches to implementation revealed that a lower Si/Al ratio in zeolite promotes efficient K+ exchange, which combined with two-phased in situ preparation of KPW as active phase, evidently leads to the formation of isolated sites of superior activity for both catalytic and adsorptive procedures.
PB  - Elsevier B.V.
T2  - Microporous and Mesoporous Materials
T1  - The environmental impact of potassium tungstophosphate/ZSM-5 zeolite: Insight into catalysis and adsorption processes
VL  - 315
DO  - 10.1016/j.micromeso.2021.110925
ER  - 

@article{
author = "Jevremović, Anka and Nedić-Vasiljević, Bojana and Popa, Alexandru and Uskoković-Marković, Snežana and Ignjatović, Ljubiša and Bajuk-Bogdanović, Danica and Milojević-Rakić, Maja",
year = "2021",
abstract = "Environmental implementation of novel composite materials comprising potassium tungstophosphate (KPW) and ZSM-5 zeolite was tested in ethene production and pesticide removal. The study revealed that the binding of KPW to ZSM-5 zeolites of different Si/Al ratios affects the formation of active centres for catalytic and adsorption processes. Brønsted active sites present in the zeolite framework are synergistically joined with Lewis centres and additional Brønsted centres through the impregnation of potassium tungstophosphate, which resulted in improvement of stability and activity of investigated materials. Adsorption and catalytic performance were found to be influenced by the order of addition of salt precursors and by post-synthesis thermal treatment. The best results found both in ethanol dehydration and nicosulfuron removal were for the same sample of KPW supported at zeolite ZSM-5 (SiO2/Al2O3 = 30). The prominent ethanol conversion of 98% and the highest and most stable selectivity toward ethene were evidenced, along with the capacity of 28.4 mg of targeted pesticide retained per gram of designed KPW/ZSM composite. This comprehensive investigation enabled insight into active site formations in the efficient KPW/ZSM composites. Different approaches to implementation revealed that a lower Si/Al ratio in zeolite promotes efficient K+ exchange, which combined with two-phased in situ preparation of KPW as active phase, evidently leads to the formation of isolated sites of superior activity for both catalytic and adsorptive procedures.",
publisher = "Elsevier B.V.",
journal = "Microporous and Mesoporous Materials",
title = "The environmental impact of potassium tungstophosphate/ZSM-5 zeolite: Insight into catalysis and adsorption processes",
volume = "315",
doi = "10.1016/j.micromeso.2021.110925"
}

Jevremović, A., Nedić-Vasiljević, B., Popa, A., Uskoković-Marković, S., Ignjatović, L., Bajuk-Bogdanović, D.,& Milojević-Rakić, M.. (2021). The environmental impact of potassium tungstophosphate/ZSM-5 zeolite: Insight into catalysis and adsorption processes. in Microporous and Mesoporous Materials
Elsevier B.V.., 315.
https://doi.org/10.1016/j.micromeso.2021.110925

Jevremović A, Nedić-Vasiljević B, Popa A, Uskoković-Marković S, Ignjatović L, Bajuk-Bogdanović D, Milojević-Rakić M. The environmental impact of potassium tungstophosphate/ZSM-5 zeolite: Insight into catalysis and adsorption processes. in Microporous and Mesoporous Materials. 2021;315.
doi:10.1016/j.micromeso.2021.110925 .

Jevremović, Anka, Nedić-Vasiljević, Bojana, Popa, Alexandru, Uskoković-Marković, Snežana, Ignjatović, Ljubiša, Bajuk-Bogdanović, Danica, Milojević-Rakić, Maja, "The environmental impact of potassium tungstophosphate/ZSM-5 zeolite: Insight into catalysis and adsorption processes" in Microporous and Mesoporous Materials, 315 (2021),
https://doi.org/10.1016/j.micromeso.2021.110925 . .