TY  - JOUR
AU  - Ignjatović, Jelisaveta
AU  - Šušteršič, Tijana
AU  - Bodić, Aleksandar
AU  - Cvijić, Sandra
AU  - Ðuriš, Jelena
AU  - Rossi, Alessandra
AU  - Dobričić, Vladimir
AU  - Ibrić, Svetlana
AU  - Filipović, Nenad
PY  - 2021
UR  - https://farfar.pharmacy.bg.ac.rs/handle/123456789/3993
AB  - In vitro assessment of dry powders for inhalation (DPIs) aerodynamic performance is an inevitable test in DPI development. However, contemporary trends in drug development also implicate the use of in silico methods, e.g., computational fluid dynamics (CFD) coupled with discrete phase modeling (DPM). The aim of this study was to compare the designed CFD-DPM outcomes with the results of three in vitro methods for aerodynamic assessment of solid lipid microparticle DPIs. The model was able to simulate particle-to-wall sticking and estimate fractions of particles that stick or bounce off the inhaler’s wall; however, we observed notable differences between the in silico and in vitro results. The predicted emitted fractions (EFs) were comparable to the in vitro determined EFs, whereas the predicted fine particle fractions (FPFs) were generally lower than the corresponding in vitro values. In addition, CFD-DPM predicted higher mass median aerodynamic diameter (MMAD) in comparison to the in vitro values. The outcomes of different in vitro methods also diverged, implying that these methods are not interchangeable. Overall, our results support the utility of CFD-DPM in the DPI development, but highlight the need for additional improvements in these models to capture all the key processes influencing aerodynamic performance of specific DPIs.
PB  - MDPI
T2  - Pharmaceutics
T1  - Comparative assessment of in vitro and in silico methods for aerodynamic characterization of powders for inhalation
VL  - 13
IS  - 11
DO  - 10.3390/pharmaceutics13111831
ER  - 

@article{
author = "Ignjatović, Jelisaveta and Šušteršič, Tijana and Bodić, Aleksandar and Cvijić, Sandra and Ðuriš, Jelena and Rossi, Alessandra and Dobričić, Vladimir and Ibrić, Svetlana and Filipović, Nenad",
year = "2021",
abstract = "In vitro assessment of dry powders for inhalation (DPIs) aerodynamic performance is an inevitable test in DPI development. However, contemporary trends in drug development also implicate the use of in silico methods, e.g., computational fluid dynamics (CFD) coupled with discrete phase modeling (DPM). The aim of this study was to compare the designed CFD-DPM outcomes with the results of three in vitro methods for aerodynamic assessment of solid lipid microparticle DPIs. The model was able to simulate particle-to-wall sticking and estimate fractions of particles that stick or bounce off the inhaler’s wall; however, we observed notable differences between the in silico and in vitro results. The predicted emitted fractions (EFs) were comparable to the in vitro determined EFs, whereas the predicted fine particle fractions (FPFs) were generally lower than the corresponding in vitro values. In addition, CFD-DPM predicted higher mass median aerodynamic diameter (MMAD) in comparison to the in vitro values. The outcomes of different in vitro methods also diverged, implying that these methods are not interchangeable. Overall, our results support the utility of CFD-DPM in the DPI development, but highlight the need for additional improvements in these models to capture all the key processes influencing aerodynamic performance of specific DPIs.",
publisher = "MDPI",
journal = "Pharmaceutics",
title = "Comparative assessment of in vitro and in silico methods for aerodynamic characterization of powders for inhalation",
volume = "13",
number = "11",
doi = "10.3390/pharmaceutics13111831"
}

Ignjatović, J., Šušteršič, T., Bodić, A., Cvijić, S., Ðuriš, J., Rossi, A., Dobričić, V., Ibrić, S.,& Filipović, N.. (2021). Comparative assessment of in vitro and in silico methods for aerodynamic characterization of powders for inhalation. in Pharmaceutics
MDPI., 13(11).
https://doi.org/10.3390/pharmaceutics13111831

Ignjatović J, Šušteršič T, Bodić A, Cvijić S, Ðuriš J, Rossi A, Dobričić V, Ibrić S, Filipović N. Comparative assessment of in vitro and in silico methods for aerodynamic characterization of powders for inhalation. in Pharmaceutics. 2021;13(11).
doi:10.3390/pharmaceutics13111831 .

Ignjatović, Jelisaveta, Šušteršič, Tijana, Bodić, Aleksandar, Cvijić, Sandra, Ðuriš, Jelena, Rossi, Alessandra, Dobričić, Vladimir, Ibrić, Svetlana, Filipović, Nenad, "Comparative assessment of in vitro and in silico methods for aerodynamic characterization of powders for inhalation" in Pharmaceutics, 13, no. 11 (2021),
https://doi.org/10.3390/pharmaceutics13111831 . .

TY  - JOUR
AU  - Mudrić, Jelena
AU  - Šavikin, Katarina
AU  - Ðekić, Ljiljana
AU  - Pavlović, Stefan
AU  - Kurćubić, Ivana
AU  - Ibrić, Svetlana
AU  - Ðuriš, Jelena
PY  - 2021
UR  - https://farfar.pharmacy.bg.ac.rs/handle/123456789/4014
AB  - Gentian (Gentiana lutea L., Gentianaceae) root extract (GRE) is used for the treatment of gastrointestinal disorders. However, its bioactive potential is limited in conventional forms due to the low bioavailability and short elimination half-life of the dominant bioactive compound, gentiopicroside. The aim of study was to encapsulate GRE in the lipid-based gastroretentive delivery system that could provide high yield and encapsulation efficiency, as well as the biphasic release of gentiopicroside from the tablets obtained by direct compression. Solid lipid microparticles (SLM) loaded with GRE were prepared by freeze-drying double (W/O/W) emulsions, which were obtained by a multiple emulsion–melt dispersion technique, with GRE as the inner water phase, Gelucire® 39/01 or 43/01, as lipid components, with or without the addition of porous silica (Sylysia® 350) in the outer water phase. Formulated SLM powders were examined by SEM and mercury intrusion porosimetry, as well as by determination of yield, encapsulation efficiency, and flow properties. Furthermore, in vitro dissolution of gentiopicroside, the size of the dispersed systems, mechanical properties, and mucoadhesion of tablets obtained by direct compression were investigated. The results have revealed that SLM with the macroporous structure were formulated, and, consequently, the powders floated immediately in the acidic medium. Formulation with porous silica (Sylysia® 350) and Gelucire® 43/01 as a solid lipid was characterized with the high yield end encapsulation efficiency. Furthermore, the mucoadhesive properties of tablets obtained by direct compression of that formulation, as well as the biphasic release of gentiopicroside, presence of nanoassociates in dissolution medium, and optimal mechanical properties indicated that a promising lipid-based gastroretentive system for GRE was developed.
PB  - MDPI
T2  - Pharmaceutics
T1  - Development of lipid-based gastroretentive delivery system for gentian extract by double emulsion–melt dispersion technique
VL  - 13
IS  - 12
DO  - 10.3390/pharmaceutics13122095
ER  - 

@article{
author = "Mudrić, Jelena and Šavikin, Katarina and Ðekić, Ljiljana and Pavlović, Stefan and Kurćubić, Ivana and Ibrić, Svetlana and Ðuriš, Jelena",
year = "2021",
abstract = "Gentian (Gentiana lutea L., Gentianaceae) root extract (GRE) is used for the treatment of gastrointestinal disorders. However, its bioactive potential is limited in conventional forms due to the low bioavailability and short elimination half-life of the dominant bioactive compound, gentiopicroside. The aim of study was to encapsulate GRE in the lipid-based gastroretentive delivery system that could provide high yield and encapsulation efficiency, as well as the biphasic release of gentiopicroside from the tablets obtained by direct compression. Solid lipid microparticles (SLM) loaded with GRE were prepared by freeze-drying double (W/O/W) emulsions, which were obtained by a multiple emulsion–melt dispersion technique, with GRE as the inner water phase, Gelucire® 39/01 or 43/01, as lipid components, with or without the addition of porous silica (Sylysia® 350) in the outer water phase. Formulated SLM powders were examined by SEM and mercury intrusion porosimetry, as well as by determination of yield, encapsulation efficiency, and flow properties. Furthermore, in vitro dissolution of gentiopicroside, the size of the dispersed systems, mechanical properties, and mucoadhesion of tablets obtained by direct compression were investigated. The results have revealed that SLM with the macroporous structure were formulated, and, consequently, the powders floated immediately in the acidic medium. Formulation with porous silica (Sylysia® 350) and Gelucire® 43/01 as a solid lipid was characterized with the high yield end encapsulation efficiency. Furthermore, the mucoadhesive properties of tablets obtained by direct compression of that formulation, as well as the biphasic release of gentiopicroside, presence of nanoassociates in dissolution medium, and optimal mechanical properties indicated that a promising lipid-based gastroretentive system for GRE was developed.",
publisher = "MDPI",
journal = "Pharmaceutics",
title = "Development of lipid-based gastroretentive delivery system for gentian extract by double emulsion–melt dispersion technique",
volume = "13",
number = "12",
doi = "10.3390/pharmaceutics13122095"
}

Mudrić, J., Šavikin, K., Ðekić, L., Pavlović, S., Kurćubić, I., Ibrić, S.,& Ðuriš, J.. (2021). Development of lipid-based gastroretentive delivery system for gentian extract by double emulsion–melt dispersion technique. in Pharmaceutics
MDPI., 13(12).
https://doi.org/10.3390/pharmaceutics13122095

Mudrić J, Šavikin K, Ðekić L, Pavlović S, Kurćubić I, Ibrić S, Ðuriš J. Development of lipid-based gastroretentive delivery system for gentian extract by double emulsion–melt dispersion technique. in Pharmaceutics. 2021;13(12).
doi:10.3390/pharmaceutics13122095 .

Mudrić, Jelena, Šavikin, Katarina, Ðekić, Ljiljana, Pavlović, Stefan, Kurćubić, Ivana, Ibrić, Svetlana, Ðuriš, Jelena, "Development of lipid-based gastroretentive delivery system for gentian extract by double emulsion–melt dispersion technique" in Pharmaceutics, 13, no. 12 (2021),
https://doi.org/10.3390/pharmaceutics13122095 . .