Marković, Marija

Link to this page

Authority KeyName Variants
821d4ecb-e48e-4f83-9133-8726504652a9
  • Marković, Marija (5)

Author's Bibliography

Influence of surface coverage of kaolin with surfactant ions on adsorption of ochratoxin A and zearalenone

Spasojević, Milica; Daković, Aleksandra; Rottinghaus, George E.; Obradović, Milena; Krajišnik, Danina; Marković, Marija; Krstić, Jugoslav

(Elsevier Ltd, 2021)

TY  - JOUR
AU  - Spasojević, Milica
AU  - Daković, Aleksandra
AU  - Rottinghaus, George E.
AU  - Obradović, Milena
AU  - Krajišnik, Danina
AU  - Marković, Marija
AU  - Krstić, Jugoslav
PY  - 2021
UR  - https://farfar.pharmacy.bg.ac.rs/handle/123456789/3795
AB  - A natural kaolin from Serbia was modified with different amounts of octadecyldimethylbenzyl ammonium (ODMBA) - (25, 50 and 90% of kaolin cation exchange capacity). Samples were denoted as OKR-25, OKR-50 and OKR-90. Several methods (FTIR spectroscopy, thermal analysis, zeta potential measurements, and N2 physisorption) were used for characterization of the organokaolinites. Adsorption of the common mycotoxins - ochratoxin A (OCHRA) and zearalenone (ZEN) by the organokaolinites was investigated at different levels of solid phase in suspension, different initial mycotoxin concentrations and different pH values. The natural kaolin was not effective in binding OCHRA or ZEN. Adsorption of both mycotoxins by organokaolinites increased with increasing amounts of solid phase as well as with increasing levels of surfactant on the kaolin surface. OCHRA and ZEN adsorption by all organokaolinites followed non-linear adsorption isotherms, at pH 3, 7 and 9. The maximum adsorption capacity for OCHRA adsorption was at pH 3 (4.8 mg/g for OKR-25, 26.7 mg/g for OKR-50 and 39.2 mg/g for OKR-90) that was calculated from the Langmuir model. Much lower OCHRA adsorption capacities were found at pH 7 and 9 (from 0.8 mg/g to 6.9 mg/g at pH 7 and from 1.1 mg/g to 4.6 mg/g at pH 9). The following adsorption capacities for ZEN were obtained from the Langmuir isotherms, at pH 3: 4.5 mg/g for OKR-25, 12.0 mg/g for OKR-50 and 13.5 mg/g for OKR-90. At pH 7, adsorption of ZEN was 5.7 mg/g for OKR-25, 15.3 mg/g for OKR-90 and 14. 4 mg/g for OKR-90. At pH 9, ZEN adsorption capacities were 2.4, 14.1 and 8.1 mg/g for OKR-25, OKR-50 and OKR-90, respectively. Thus, at the lowest amount of ODMBA at the kaolin surface, adsorption of ZEN was similar at pH 3 and 7, while a slightly lower value was obtained for its adsorption at pH 9. With increasing amounts of organic phase at the kaolin surface, the adsorption of ZEN was practically independent of pH. Adsorption of both mycotoxins was dependent on the amount of ODMBA ions at the kaolin surface as well as on their forms in solution.
PB  - Elsevier Ltd
T2  - Applied Clay Science
T1  - Influence of surface coverage of kaolin with surfactant ions on adsorption of ochratoxin A and zearalenone
VL  - 205
DO  - 10.1016/j.clay.2021.106040
ER  - 
@article{
author = "Spasojević, Milica and Daković, Aleksandra and Rottinghaus, George E. and Obradović, Milena and Krajišnik, Danina and Marković, Marija and Krstić, Jugoslav",
year = "2021",
abstract = "A natural kaolin from Serbia was modified with different amounts of octadecyldimethylbenzyl ammonium (ODMBA) - (25, 50 and 90% of kaolin cation exchange capacity). Samples were denoted as OKR-25, OKR-50 and OKR-90. Several methods (FTIR spectroscopy, thermal analysis, zeta potential measurements, and N2 physisorption) were used for characterization of the organokaolinites. Adsorption of the common mycotoxins - ochratoxin A (OCHRA) and zearalenone (ZEN) by the organokaolinites was investigated at different levels of solid phase in suspension, different initial mycotoxin concentrations and different pH values. The natural kaolin was not effective in binding OCHRA or ZEN. Adsorption of both mycotoxins by organokaolinites increased with increasing amounts of solid phase as well as with increasing levels of surfactant on the kaolin surface. OCHRA and ZEN adsorption by all organokaolinites followed non-linear adsorption isotherms, at pH 3, 7 and 9. The maximum adsorption capacity for OCHRA adsorption was at pH 3 (4.8 mg/g for OKR-25, 26.7 mg/g for OKR-50 and 39.2 mg/g for OKR-90) that was calculated from the Langmuir model. Much lower OCHRA adsorption capacities were found at pH 7 and 9 (from 0.8 mg/g to 6.9 mg/g at pH 7 and from 1.1 mg/g to 4.6 mg/g at pH 9). The following adsorption capacities for ZEN were obtained from the Langmuir isotherms, at pH 3: 4.5 mg/g for OKR-25, 12.0 mg/g for OKR-50 and 13.5 mg/g for OKR-90. At pH 7, adsorption of ZEN was 5.7 mg/g for OKR-25, 15.3 mg/g for OKR-90 and 14. 4 mg/g for OKR-90. At pH 9, ZEN adsorption capacities were 2.4, 14.1 and 8.1 mg/g for OKR-25, OKR-50 and OKR-90, respectively. Thus, at the lowest amount of ODMBA at the kaolin surface, adsorption of ZEN was similar at pH 3 and 7, while a slightly lower value was obtained for its adsorption at pH 9. With increasing amounts of organic phase at the kaolin surface, the adsorption of ZEN was practically independent of pH. Adsorption of both mycotoxins was dependent on the amount of ODMBA ions at the kaolin surface as well as on their forms in solution.",
publisher = "Elsevier Ltd",
journal = "Applied Clay Science",
title = "Influence of surface coverage of kaolin with surfactant ions on adsorption of ochratoxin A and zearalenone",
volume = "205",
doi = "10.1016/j.clay.2021.106040"
}
Spasojević, M., Daković, A., Rottinghaus, G. E., Obradović, M., Krajišnik, D., Marković, M.,& Krstić, J.. (2021). Influence of surface coverage of kaolin with surfactant ions on adsorption of ochratoxin A and zearalenone. in Applied Clay Science
Elsevier Ltd., 205.
https://doi.org/10.1016/j.clay.2021.106040
Spasojević M, Daković A, Rottinghaus GE, Obradović M, Krajišnik D, Marković M, Krstić J. Influence of surface coverage of kaolin with surfactant ions on adsorption of ochratoxin A and zearalenone. in Applied Clay Science. 2021;205.
doi:10.1016/j.clay.2021.106040 .
Spasojević, Milica, Daković, Aleksandra, Rottinghaus, George E., Obradović, Milena, Krajišnik, Danina, Marković, Marija, Krstić, Jugoslav, "Influence of surface coverage of kaolin with surfactant ions on adsorption of ochratoxin A and zearalenone" in Applied Clay Science, 205 (2021),
https://doi.org/10.1016/j.clay.2021.106040 . .
4
2
5

Adsorption of the mycotoxin zearalenone by clinoptilolite and phillipsite zeolites treated with cetylpyridinium surfactant

Marković, Marija; Daković, Aleksandra; Rottinghaus, George E.; Kragović, Milan; Petković, Andela; Krajišnik, Danina; Milić, Jela; Mercurio, Mariano; de Gennaro, Bruno

(Elsevier Science BV, Amsterdam, 2017)

TY  - JOUR
AU  - Marković, Marija
AU  - Daković, Aleksandra
AU  - Rottinghaus, George E.
AU  - Kragović, Milan
AU  - Petković, Andela
AU  - Krajišnik, Danina
AU  - Milić, Jela
AU  - Mercurio, Mariano
AU  - de Gennaro, Bruno
PY  - 2017
UR  - https://farfar.pharmacy.bg.ac.rs/handle/123456789/2929
AB  - In this study, organozeolites were prepared by treatment of the natural zeolites (clinoptilolite and phillipsite) with cetylpyridinium chloride (CP) equivalent to 50 and 100% of their external cation exchange capacities (ECEC). Organoclinoptilolites (ZCPs) and organophillipsites (PCPs) were characterized by FTIR spectroscopy, thermal analysis, determination of the point of zero charge and zeta potential. Adsorption of zearalenone (ZEN) by ZCPs and PCPs at pH 3 and 7 was investigated. Results showed that adsorption of ZEN increases with increasing amounts of CP at the zeolitic surfaces for both ZCPs and PCPs but the adsorption mechanism was different. Adsorption of ZEN by ZCPs followed a linear type of isotherm at pH 3 and 7 while ZEN adsorption by PCPs showed non linear (Langmuir and Freundlich) type of isotherm at both pH values. Different interactions between the ZEN molecule (or ion) and ZCPs and PCPs occurred: partition (linear isotherms) and adsorption in addition to partition (non linear isotherms), respectively. For the highest level of organic phase at the zeolitic surfaces, the maximum adsorbed amount of ZEN was 5.73 mg/g for organoclinoptilolite and 6.86 mg/g for organophillipsite at pH 3. Slightly higher adsorption: 6.98 mg/g for organoclinoptilolite and 7.54 mg/g for organophillipsite was achieved at pH 7. The results confirmed that CP ions at both zeolitic surfaces are responsible for ZEN adsorption and that organophillipsites are as effective in ZEN adsorption as organoclinoptilolites.
PB  - Elsevier Science BV, Amsterdam
T2  - Colloids and Surfaces B: Biointerfaces
T1  - Adsorption of the mycotoxin zearalenone by clinoptilolite and phillipsite zeolites treated with cetylpyridinium surfactant
VL  - 151
SP  - 324
EP  - 332
DO  - 10.1016/j.colsurfb.2016.12.033
ER  - 
@article{
author = "Marković, Marija and Daković, Aleksandra and Rottinghaus, George E. and Kragović, Milan and Petković, Andela and Krajišnik, Danina and Milić, Jela and Mercurio, Mariano and de Gennaro, Bruno",
year = "2017",
abstract = "In this study, organozeolites were prepared by treatment of the natural zeolites (clinoptilolite and phillipsite) with cetylpyridinium chloride (CP) equivalent to 50 and 100% of their external cation exchange capacities (ECEC). Organoclinoptilolites (ZCPs) and organophillipsites (PCPs) were characterized by FTIR spectroscopy, thermal analysis, determination of the point of zero charge and zeta potential. Adsorption of zearalenone (ZEN) by ZCPs and PCPs at pH 3 and 7 was investigated. Results showed that adsorption of ZEN increases with increasing amounts of CP at the zeolitic surfaces for both ZCPs and PCPs but the adsorption mechanism was different. Adsorption of ZEN by ZCPs followed a linear type of isotherm at pH 3 and 7 while ZEN adsorption by PCPs showed non linear (Langmuir and Freundlich) type of isotherm at both pH values. Different interactions between the ZEN molecule (or ion) and ZCPs and PCPs occurred: partition (linear isotherms) and adsorption in addition to partition (non linear isotherms), respectively. For the highest level of organic phase at the zeolitic surfaces, the maximum adsorbed amount of ZEN was 5.73 mg/g for organoclinoptilolite and 6.86 mg/g for organophillipsite at pH 3. Slightly higher adsorption: 6.98 mg/g for organoclinoptilolite and 7.54 mg/g for organophillipsite was achieved at pH 7. The results confirmed that CP ions at both zeolitic surfaces are responsible for ZEN adsorption and that organophillipsites are as effective in ZEN adsorption as organoclinoptilolites.",
publisher = "Elsevier Science BV, Amsterdam",
journal = "Colloids and Surfaces B: Biointerfaces",
title = "Adsorption of the mycotoxin zearalenone by clinoptilolite and phillipsite zeolites treated with cetylpyridinium surfactant",
volume = "151",
pages = "324-332",
doi = "10.1016/j.colsurfb.2016.12.033"
}
Marković, M., Daković, A., Rottinghaus, G. E., Kragović, M., Petković, A., Krajišnik, D., Milić, J., Mercurio, M.,& de Gennaro, B.. (2017). Adsorption of the mycotoxin zearalenone by clinoptilolite and phillipsite zeolites treated with cetylpyridinium surfactant. in Colloids and Surfaces B: Biointerfaces
Elsevier Science BV, Amsterdam., 151, 324-332.
https://doi.org/10.1016/j.colsurfb.2016.12.033
Marković M, Daković A, Rottinghaus GE, Kragović M, Petković A, Krajišnik D, Milić J, Mercurio M, de Gennaro B. Adsorption of the mycotoxin zearalenone by clinoptilolite and phillipsite zeolites treated with cetylpyridinium surfactant. in Colloids and Surfaces B: Biointerfaces. 2017;151:324-332.
doi:10.1016/j.colsurfb.2016.12.033 .
Marković, Marija, Daković, Aleksandra, Rottinghaus, George E., Kragović, Milan, Petković, Andela, Krajišnik, Danina, Milić, Jela, Mercurio, Mariano, de Gennaro, Bruno, "Adsorption of the mycotoxin zearalenone by clinoptilolite and phillipsite zeolites treated with cetylpyridinium surfactant" in Colloids and Surfaces B: Biointerfaces, 151 (2017):324-332,
https://doi.org/10.1016/j.colsurfb.2016.12.033 . .
54
31
56

Ochratoxin A and zearalenone adsorption by the natural zeolite treated with benzalkonium chloride

Marković, Marija; Daković, Aleksandra; Rottinghaus, George E.; Petković, Andela; Kragović, Milan; Krajišnik, Danina; Milić, Jela

(Elsevier Science BV, Amsterdam, 2017)

TY  - JOUR
AU  - Marković, Marija
AU  - Daković, Aleksandra
AU  - Rottinghaus, George E.
AU  - Petković, Andela
AU  - Kragović, Milan
AU  - Krajišnik, Danina
AU  - Milić, Jela
PY  - 2017
UR  - https://farfar.pharmacy.bg.ac.rs/handle/123456789/2827
AB  - Benzalkonium chloride - BC (the mixture of alkylbenzyldimethylammonium chlorides containing the alkyl groups having chain lengths of C8 to C18 and benzyl functional group) was used as a surfactant for production of organozeolites (BZs). The natural zeolite - clinoptilolite was modified with three different levels (2, 5 and 10 mmol/100 g) of BC. FTIR spectroscopy, thermal analysis, zeta potential measurements, determination of the point of zero charge and BET were used to determine the quantity of the surfactant at the zeolitic surface. The main aim was to investigate adsorption properties of BZs towards ochratoxin A (OCHRA) and zearalenone (ZEN) under in vitro conditions. Results showed that adsorption of OCHRA and ZEN by BZs increased with increasing amounts of BC at the zeolitic surface but the adsorption mechanism was different. Adsorption of OCHRA by BZs followed nonlinear isotherms at pH 3 and 7, and higher adsorption capacity was observed at pH 3. This indicates that adsorption was dependent on the form of OCHRA in solution and that the sites at the uncovered zeolitic surface together with the surfactants contributed to OCHRA adsorption. Adsorption of ZEN by BZs showed linear isotherms at pH 3 and 7 and similar amounts were adsorbed at both pH values. This suggests that adsorption is practically independent of the form of ZEN in solution and that organic cations at the zeolitic surface are the active sites relevant for ZEN adsorption.
PB  - Elsevier Science BV, Amsterdam
T2  - Colloids and Surfaces A: Physicochemical and Engineering Aspects
T1  - Ochratoxin A and zearalenone adsorption by the natural zeolite treated with benzalkonium chloride
VL  - 529
SP  - 7
EP  - 17
DO  - 10.1016/j.colsurfa.2017.05.054
ER  - 
@article{
author = "Marković, Marija and Daković, Aleksandra and Rottinghaus, George E. and Petković, Andela and Kragović, Milan and Krajišnik, Danina and Milić, Jela",
year = "2017",
abstract = "Benzalkonium chloride - BC (the mixture of alkylbenzyldimethylammonium chlorides containing the alkyl groups having chain lengths of C8 to C18 and benzyl functional group) was used as a surfactant for production of organozeolites (BZs). The natural zeolite - clinoptilolite was modified with three different levels (2, 5 and 10 mmol/100 g) of BC. FTIR spectroscopy, thermal analysis, zeta potential measurements, determination of the point of zero charge and BET were used to determine the quantity of the surfactant at the zeolitic surface. The main aim was to investigate adsorption properties of BZs towards ochratoxin A (OCHRA) and zearalenone (ZEN) under in vitro conditions. Results showed that adsorption of OCHRA and ZEN by BZs increased with increasing amounts of BC at the zeolitic surface but the adsorption mechanism was different. Adsorption of OCHRA by BZs followed nonlinear isotherms at pH 3 and 7, and higher adsorption capacity was observed at pH 3. This indicates that adsorption was dependent on the form of OCHRA in solution and that the sites at the uncovered zeolitic surface together with the surfactants contributed to OCHRA adsorption. Adsorption of ZEN by BZs showed linear isotherms at pH 3 and 7 and similar amounts were adsorbed at both pH values. This suggests that adsorption is practically independent of the form of ZEN in solution and that organic cations at the zeolitic surface are the active sites relevant for ZEN adsorption.",
publisher = "Elsevier Science BV, Amsterdam",
journal = "Colloids and Surfaces A: Physicochemical and Engineering Aspects",
title = "Ochratoxin A and zearalenone adsorption by the natural zeolite treated with benzalkonium chloride",
volume = "529",
pages = "7-17",
doi = "10.1016/j.colsurfa.2017.05.054"
}
Marković, M., Daković, A., Rottinghaus, G. E., Petković, A., Kragović, M., Krajišnik, D.,& Milić, J.. (2017). Ochratoxin A and zearalenone adsorption by the natural zeolite treated with benzalkonium chloride. in Colloids and Surfaces A: Physicochemical and Engineering Aspects
Elsevier Science BV, Amsterdam., 529, 7-17.
https://doi.org/10.1016/j.colsurfa.2017.05.054
Marković M, Daković A, Rottinghaus GE, Petković A, Kragović M, Krajišnik D, Milić J. Ochratoxin A and zearalenone adsorption by the natural zeolite treated with benzalkonium chloride. in Colloids and Surfaces A: Physicochemical and Engineering Aspects. 2017;529:7-17.
doi:10.1016/j.colsurfa.2017.05.054 .
Marković, Marija, Daković, Aleksandra, Rottinghaus, George E., Petković, Andela, Kragović, Milan, Krajišnik, Danina, Milić, Jela, "Ochratoxin A and zearalenone adsorption by the natural zeolite treated with benzalkonium chloride" in Colloids and Surfaces A: Physicochemical and Engineering Aspects, 529 (2017):7-17,
https://doi.org/10.1016/j.colsurfa.2017.05.054 . .
28
18
27

Evaluation of the surfactant/phillipsite composites as carriers for diclofenac sodium

Marković, Marija; Daković, Aleksandra; Krajišnik, Danina; Kragović, Milan; Milić, Jela; Langella, Alessio; de Gennaro, Bruno; Cappelletti, Piergiulio; Mercurio, Mariano

(Elsevier Science BV, Amsterdam, 2016)

TY  - JOUR
AU  - Marković, Marija
AU  - Daković, Aleksandra
AU  - Krajišnik, Danina
AU  - Kragović, Milan
AU  - Milić, Jela
AU  - Langella, Alessio
AU  - de Gennaro, Bruno
AU  - Cappelletti, Piergiulio
AU  - Mercurio, Mariano
PY  - 2016
UR  - https://farfar.pharmacy.bg.ac.rs/handle/123456789/2696
AB  - Incorporation of diclofenac sodium into phillipsite modified with cetylpyridinium chloride (CP-Cl) or hexadecyltrimethyl ammonium bromide (HDTMA-Br) was followed by batch equilibrium adsorption studies in buffer solution at pH = 7.4. Characteristics of the drug/surfactant/zeolite complexes were investigated by UV/VIS, FTIR spectroscopy, thermal (DTA/TG) analysis and-potential measurements. The obtained data confirmed that organic cations at phillipsite surface were responsible for incorporation of diclofenac sodium. Diclofenac sodium incorporated amounts increased with increasing the amount of each surfactant as well as with increasing the initial drug concentration. Langmuir model was the best model for fitting the experimental data of diclofenac adsorption on surfactant/phillipsite composites, suggesting complex adsorption mechanism. The physico-chemical properties of surfactant/phillipsite composites and enhanced incorporation of diclofenac sodium suggests that it might be possible to use these materials as drug carriers.
PB  - Elsevier Science BV, Amsterdam
T2  - Journal of Molecular Liquids
T1  - Evaluation of the surfactant/phillipsite composites as carriers for diclofenac sodium
VL  - 222
SP  - 711
EP  - 716
DO  - 10.1016/j.molliq.2016.07.127
ER  - 
@article{
author = "Marković, Marija and Daković, Aleksandra and Krajišnik, Danina and Kragović, Milan and Milić, Jela and Langella, Alessio and de Gennaro, Bruno and Cappelletti, Piergiulio and Mercurio, Mariano",
year = "2016",
abstract = "Incorporation of diclofenac sodium into phillipsite modified with cetylpyridinium chloride (CP-Cl) or hexadecyltrimethyl ammonium bromide (HDTMA-Br) was followed by batch equilibrium adsorption studies in buffer solution at pH = 7.4. Characteristics of the drug/surfactant/zeolite complexes were investigated by UV/VIS, FTIR spectroscopy, thermal (DTA/TG) analysis and-potential measurements. The obtained data confirmed that organic cations at phillipsite surface were responsible for incorporation of diclofenac sodium. Diclofenac sodium incorporated amounts increased with increasing the amount of each surfactant as well as with increasing the initial drug concentration. Langmuir model was the best model for fitting the experimental data of diclofenac adsorption on surfactant/phillipsite composites, suggesting complex adsorption mechanism. The physico-chemical properties of surfactant/phillipsite composites and enhanced incorporation of diclofenac sodium suggests that it might be possible to use these materials as drug carriers.",
publisher = "Elsevier Science BV, Amsterdam",
journal = "Journal of Molecular Liquids",
title = "Evaluation of the surfactant/phillipsite composites as carriers for diclofenac sodium",
volume = "222",
pages = "711-716",
doi = "10.1016/j.molliq.2016.07.127"
}
Marković, M., Daković, A., Krajišnik, D., Kragović, M., Milić, J., Langella, A., de Gennaro, B., Cappelletti, P.,& Mercurio, M.. (2016). Evaluation of the surfactant/phillipsite composites as carriers for diclofenac sodium. in Journal of Molecular Liquids
Elsevier Science BV, Amsterdam., 222, 711-716.
https://doi.org/10.1016/j.molliq.2016.07.127
Marković M, Daković A, Krajišnik D, Kragović M, Milić J, Langella A, de Gennaro B, Cappelletti P, Mercurio M. Evaluation of the surfactant/phillipsite composites as carriers for diclofenac sodium. in Journal of Molecular Liquids. 2016;222:711-716.
doi:10.1016/j.molliq.2016.07.127 .
Marković, Marija, Daković, Aleksandra, Krajišnik, Danina, Kragović, Milan, Milić, Jela, Langella, Alessio, de Gennaro, Bruno, Cappelletti, Piergiulio, Mercurio, Mariano, "Evaluation of the surfactant/phillipsite composites as carriers for diclofenac sodium" in Journal of Molecular Liquids, 222 (2016):711-716,
https://doi.org/10.1016/j.molliq.2016.07.127 . .
16
9
15

Inorganically modified diatomite as a potential prolonged-release drug carrier

Janićijević, Jelena; Krajišnik, Danina; Čalija, Bojan; Dobričić, Vladimir; Daković, Aleksandra; Krstić, Jugoslav; Marković, Marija; Milić, Jela

(Elsevier Science BV, Amsterdam, 2014)

TY  - JOUR
AU  - Janićijević, Jelena
AU  - Krajišnik, Danina
AU  - Čalija, Bojan
AU  - Dobričić, Vladimir
AU  - Daković, Aleksandra
AU  - Krstić, Jugoslav
AU  - Marković, Marija
AU  - Milić, Jela
PY  - 2014
UR  - https://farfar.pharmacy.bg.ac.rs/handle/123456789/2101
AB  - Inorganic modification of diatomite was performed with the precipitation product of partially neutralized aluminum sulfate solution at three different mass ratios. The starting and the modified diatomites were characterized by SEM-EDS, FTIR, thermal analysis and zeta potential measurements and evaluated for drug loading capacity in adsorption batch experiments using diclofenac sodium (DS) as a model drug. In vitro drug release studies were performed in phosphate buffer pH 6.8 from comprimates containing: the drug adsorbed onto the selected modified diatomite sample (DAMD), physical mixture of the drug with the selected modified diatomite sample (PMDMD) and physical mixture of the drug with the starting diatomite (PMDD). In vivo acute toxicity testing of the modified diatomite samples was performed on mice. High adsorbent loading of the selected modified diatomite sample (similar to 250 mg/g in 2 h) enabled the preparation of comprimates containing adsorbed DS in the amount near to its therapeutic dose. Drug release studies demonstrated prolonged release of DS over a period of 8 h from both DAMD comprimates (18% after 8 h) and PMDMD comprimates (45% after 8 h). The release kinetics for DAMD and PMDMD comprimates fitted well with Korsmeyer-Peppas and Bhaskar models, indicating that the release mechanism was a combination of non-Fickian diffusion and ion exchange process.
PB  - Elsevier Science BV, Amsterdam
T2  - Materials Science & Engineering C: Materials for Biological Applications
T1  - Inorganically modified diatomite as a potential prolonged-release drug carrier
VL  - 42
SP  - 412
EP  - 420
DO  - 10.1016/j.msec.2014.05.052
ER  - 
@article{
author = "Janićijević, Jelena and Krajišnik, Danina and Čalija, Bojan and Dobričić, Vladimir and Daković, Aleksandra and Krstić, Jugoslav and Marković, Marija and Milić, Jela",
year = "2014",
abstract = "Inorganic modification of diatomite was performed with the precipitation product of partially neutralized aluminum sulfate solution at three different mass ratios. The starting and the modified diatomites were characterized by SEM-EDS, FTIR, thermal analysis and zeta potential measurements and evaluated for drug loading capacity in adsorption batch experiments using diclofenac sodium (DS) as a model drug. In vitro drug release studies were performed in phosphate buffer pH 6.8 from comprimates containing: the drug adsorbed onto the selected modified diatomite sample (DAMD), physical mixture of the drug with the selected modified diatomite sample (PMDMD) and physical mixture of the drug with the starting diatomite (PMDD). In vivo acute toxicity testing of the modified diatomite samples was performed on mice. High adsorbent loading of the selected modified diatomite sample (similar to 250 mg/g in 2 h) enabled the preparation of comprimates containing adsorbed DS in the amount near to its therapeutic dose. Drug release studies demonstrated prolonged release of DS over a period of 8 h from both DAMD comprimates (18% after 8 h) and PMDMD comprimates (45% after 8 h). The release kinetics for DAMD and PMDMD comprimates fitted well with Korsmeyer-Peppas and Bhaskar models, indicating that the release mechanism was a combination of non-Fickian diffusion and ion exchange process.",
publisher = "Elsevier Science BV, Amsterdam",
journal = "Materials Science & Engineering C: Materials for Biological Applications",
title = "Inorganically modified diatomite as a potential prolonged-release drug carrier",
volume = "42",
pages = "412-420",
doi = "10.1016/j.msec.2014.05.052"
}
Janićijević, J., Krajišnik, D., Čalija, B., Dobričić, V., Daković, A., Krstić, J., Marković, M.,& Milić, J.. (2014). Inorganically modified diatomite as a potential prolonged-release drug carrier. in Materials Science & Engineering C: Materials for Biological Applications
Elsevier Science BV, Amsterdam., 42, 412-420.
https://doi.org/10.1016/j.msec.2014.05.052
Janićijević J, Krajišnik D, Čalija B, Dobričić V, Daković A, Krstić J, Marković M, Milić J. Inorganically modified diatomite as a potential prolonged-release drug carrier. in Materials Science & Engineering C: Materials for Biological Applications. 2014;42:412-420.
doi:10.1016/j.msec.2014.05.052 .
Janićijević, Jelena, Krajišnik, Danina, Čalija, Bojan, Dobričić, Vladimir, Daković, Aleksandra, Krstić, Jugoslav, Marković, Marija, Milić, Jela, "Inorganically modified diatomite as a potential prolonged-release drug carrier" in Materials Science & Engineering C: Materials for Biological Applications, 42 (2014):412-420,
https://doi.org/10.1016/j.msec.2014.05.052 . .
24
16
28