Solid lipid nanoparticles (SLN) stabilized with polyhydroxy surfactants: Preparation, characterization and physical stability investigation
Samo za registrovane korisnike
2014
Članak u časopisu (Objavljena verzija)
Metapodaci
Prikaz svih podataka o dokumentuApstrakt
Polyhydroxy surfactants are nonionic ethylene oxide free stabilizers known for their complimentary dermatological properties and favorable environmental profile. The aim of this study was to develop solid lipid nanoparticles (SLN) stabilized with polyhydroxy surfactants varying in the chemical structure and to investigate the influence of the surfactants on the characteristics of the particles. Particles were produced by hot high pressure homogenization and the physico-chemical properties, e.g. contact angle, particle size, size distribution, zeta potential and crystallinity were determined. Results showed that the chemical structure of the surfactants influences the contact angle, particle size and crystallinity. Furthermore, the low surfactants concentration used (1% (w/w)) allowed the formation of the particles with a mean size below 200 nm, polydispersity index lower than 0.1 and sufficient physical stability for at least 6 months. As postulated by the zeta potential analysis stabi...lization ability of the surfactants was attributed to the superposition of electrostatic and steric effect which complement each other. All SLN formulations consisted of the same lipid matrix, but were found to possess different crystallinity indices. These differences are obviously created by the differences in the chemical structure of the surfactants. Therefore, the polyhydroxy surfactants investigated in this study can be judged to be novel suitable stabilizers for the formulation of well-skin tolerable SLN. The use of specific chemical structures of the surfactants can be used for the production of "tailor-made" SLN in the future.
Ključne reči:
Polyhydroxy surfactants / Solid lipid nanoparticles / SLN / Physical stability / Crystallinity / High pressure homogenizationIzvor:
Colloids and Surfaces A: Physicochemical and Engineering Aspects, 2014, 444, 15-25Izdavač:
- Elsevier Science BV, Amsterdam
Finansiranje / projekti:
- German Academic Exchange Service (DAAD)
DOI: 10.1016/j.colsurfa.2013.12.023
ISSN: 0927-7757
WoS: 000333000800003
Scopus: 2-s2.0-84891899829
Institucija/grupa
PharmacyTY - JOUR AU - Kovačević, Anđelka AU - Mueller, Rainer H. AU - Savić, Snežana AU - Vuleta, Gordana AU - Keck, Cornelia M. PY - 2014 UR - https://farfar.pharmacy.bg.ac.rs/handle/123456789/2189 AB - Polyhydroxy surfactants are nonionic ethylene oxide free stabilizers known for their complimentary dermatological properties and favorable environmental profile. The aim of this study was to develop solid lipid nanoparticles (SLN) stabilized with polyhydroxy surfactants varying in the chemical structure and to investigate the influence of the surfactants on the characteristics of the particles. Particles were produced by hot high pressure homogenization and the physico-chemical properties, e.g. contact angle, particle size, size distribution, zeta potential and crystallinity were determined. Results showed that the chemical structure of the surfactants influences the contact angle, particle size and crystallinity. Furthermore, the low surfactants concentration used (1% (w/w)) allowed the formation of the particles with a mean size below 200 nm, polydispersity index lower than 0.1 and sufficient physical stability for at least 6 months. As postulated by the zeta potential analysis stabilization ability of the surfactants was attributed to the superposition of electrostatic and steric effect which complement each other. All SLN formulations consisted of the same lipid matrix, but were found to possess different crystallinity indices. These differences are obviously created by the differences in the chemical structure of the surfactants. Therefore, the polyhydroxy surfactants investigated in this study can be judged to be novel suitable stabilizers for the formulation of well-skin tolerable SLN. The use of specific chemical structures of the surfactants can be used for the production of "tailor-made" SLN in the future. PB - Elsevier Science BV, Amsterdam T2 - Colloids and Surfaces A: Physicochemical and Engineering Aspects T1 - Solid lipid nanoparticles (SLN) stabilized with polyhydroxy surfactants: Preparation, characterization and physical stability investigation VL - 444 SP - 15 EP - 25 DO - 10.1016/j.colsurfa.2013.12.023 ER -
@article{ author = "Kovačević, Anđelka and Mueller, Rainer H. and Savić, Snežana and Vuleta, Gordana and Keck, Cornelia M.", year = "2014", abstract = "Polyhydroxy surfactants are nonionic ethylene oxide free stabilizers known for their complimentary dermatological properties and favorable environmental profile. The aim of this study was to develop solid lipid nanoparticles (SLN) stabilized with polyhydroxy surfactants varying in the chemical structure and to investigate the influence of the surfactants on the characteristics of the particles. Particles were produced by hot high pressure homogenization and the physico-chemical properties, e.g. contact angle, particle size, size distribution, zeta potential and crystallinity were determined. Results showed that the chemical structure of the surfactants influences the contact angle, particle size and crystallinity. Furthermore, the low surfactants concentration used (1% (w/w)) allowed the formation of the particles with a mean size below 200 nm, polydispersity index lower than 0.1 and sufficient physical stability for at least 6 months. As postulated by the zeta potential analysis stabilization ability of the surfactants was attributed to the superposition of electrostatic and steric effect which complement each other. All SLN formulations consisted of the same lipid matrix, but were found to possess different crystallinity indices. These differences are obviously created by the differences in the chemical structure of the surfactants. Therefore, the polyhydroxy surfactants investigated in this study can be judged to be novel suitable stabilizers for the formulation of well-skin tolerable SLN. The use of specific chemical structures of the surfactants can be used for the production of "tailor-made" SLN in the future.", publisher = "Elsevier Science BV, Amsterdam", journal = "Colloids and Surfaces A: Physicochemical and Engineering Aspects", title = "Solid lipid nanoparticles (SLN) stabilized with polyhydroxy surfactants: Preparation, characterization and physical stability investigation", volume = "444", pages = "15-25", doi = "10.1016/j.colsurfa.2013.12.023" }
Kovačević, A., Mueller, R. H., Savić, S., Vuleta, G.,& Keck, C. M.. (2014). Solid lipid nanoparticles (SLN) stabilized with polyhydroxy surfactants: Preparation, characterization and physical stability investigation. in Colloids and Surfaces A: Physicochemical and Engineering Aspects Elsevier Science BV, Amsterdam., 444, 15-25. https://doi.org/10.1016/j.colsurfa.2013.12.023
Kovačević A, Mueller RH, Savić S, Vuleta G, Keck CM. Solid lipid nanoparticles (SLN) stabilized with polyhydroxy surfactants: Preparation, characterization and physical stability investigation. in Colloids and Surfaces A: Physicochemical and Engineering Aspects. 2014;444:15-25. doi:10.1016/j.colsurfa.2013.12.023 .
Kovačević, Anđelka, Mueller, Rainer H., Savić, Snežana, Vuleta, Gordana, Keck, Cornelia M., "Solid lipid nanoparticles (SLN) stabilized with polyhydroxy surfactants: Preparation, characterization and physical stability investigation" in Colloids and Surfaces A: Physicochemical and Engineering Aspects, 444 (2014):15-25, https://doi.org/10.1016/j.colsurfa.2013.12.023 . .